Gold EBMX XLB-60 SurRon Light Bee Motor (Air Cooled)
  • SKU: GL-LBXMOTOR
  • Disponibilité: en stock Beaucoup en stock En rupture de stock You can purchase this product but it's out of stock

Gold EBMX XLB-60 SurRon Light Bee Motor (Air Cooled)

$1,999.99
Shipping calculated at checkout.
  • Vendeur: EBMX
  • Type de produit: Moteur
  • Code à barre:
DESCRIPTION

Please be aware that the EBMX XLB-60 Motor is not compatible with stock or most aftermarket bash plates (SXS Bash Plates are the only aftermarket Bash Plates which we have tested that will fit).

With this in mind, EBMX has manufactured a special bash plate for use with the XLB-60 Motors which will be included in all pre-orders that you make before the 1st of August 2023.

35KW rated and tested, designed from the ground up to handle the heat, 180C rated windings with U42H magnets

Custom IPM rotor design and industry leading 1mm rotor air gap revving out to rated 13000RPM. Encoder based motor control for increased low end torque response and smooth predicable power delivery.

We built these motors to stay cool under race conditions to ensure you focus on your riding and not your motor temperatures. It doesn’t matter if you are on the track, street or local trail, if you want the best, then this motor is for you.

The EBMX motor range has been specifically designed to surpass the performance of other motors in their classes.

In contrast to many of our competitors who utilize hall sensors, we have opted to incorporate encoder sensors in our motors. This decision stems from the fact that encoder sensors demonstrate greater stability under demanding riding conditions. While hall sensors rely on estimated rotor positions, encoder sensors consistently provide precise angle measurements of the rotor’s position. Hall sensors are typically employed for tracking motor position during start-up and up to approximately 2000 rpm, after which the motor operates in a “sensorless” manner. However, during intense riding situations such as wheel spinning and sudden deceleration combined with rapid throttle adjustments, hall sensors angle detection can result in substantial current spikes in the controller. This can pose significant issues for many controllers, leading to tripping and loss of throttle power, although this is less prevalent in the X-9000.

Encoder sensors, on the other hand, are capable of tracking motor position at all speeds and do so more frequently than hall sensors. As a result they can deliver a smoother more responsive and controllable powerband and they do not generate the same type of current spikes that often cause controller issues. Furthermore, they contribute to improved low-end torque control and overall motor response.

EBMX motor have been custom built and are finely tuned to work with the EBMX X-9000 controller. These motors will work with many other types of controllers, however they may require you to do your own custom tuning

XLB-60 Motor (Light Bee) Specifications
PEAK POWER 35000W
VOLTAGE RANCE 48v – 104v
MAX TORQUE 52Nm
MAX STABLE ROTOR RPM 13000RPM
MAX EFFICIENCY 93%
MOTOR CONFIGURATION 10 poles and 12 slots
WINDING TYPE Dual Y parallel connection
STATOR AND ROTOR STACK THICKNESS 60MM
SENSING METHOD NJDC 605 Encoder
KV Value 95KV
Rated power Air cooled:
13,600W(Continuous run for 28 mins)
24,000W(Continuous run for 2 min 20seconds)
Water cooled:
26,000W(4:30S)
Warranty 2 Year
Max Phase current 900A
Rated Phase current (Continuous run) 500A (28Nm)
Motor temperature 180 deg C windings
140 deg C start limiting
160 deg C power cut
Waterproofing IP67
Anti-corrosion Yes
Colors Black with Black End Cap
Black with Red End Cap
Black with Blue End Cap
Black with Gold End Cap
Black with Purple End Cap
Weight/Size Air cooled:
OD181.5mm*L118mm 10.5KG
Water cooled:
OD187mm*L118mm 12.5KG
RETOUR AU SOMMET